STELLA 3H Direct Contact Grease is a wide temperature range non-toxic grease containing anti-wear and other high purity additives, designed for use as a Release Agent (3H) on grills, ovens, loaf pans, boning benches, chopping boards, or other hard surfaces in contact with meat, poultry and other food products to prevent food from adhering during processing.
The grease is also suitable for all plain and anti-friction bearings as well as sliding surfaces (e.g. rails, slideways, etc.) calling for an NLGI 1 product application.
STELLA 3H Direct Contact Grease is NSF registered No. 147009 for use as a Release Agent
(3H) on grills, ovens, loaf pans, boning benches, chopping boards, or other
hard surfaces in contact with meat and poultry food products to prevent food from adhering during processing
- Provides long term lubrication at wide temperatures, extending lubrication intervals
- Good sealing properties protect against the ingress of corrosive contaminants
- Improved anti-wear performance prolonging component life
Directions for use
STELLA 3H Grease can be applied by hand, or by using a standard grease gun, or via a central lubricating system capable of pumping an NLGI No. 1 / 2 grease. As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application.
Technical Data (typical values)
|Drop point (IP 132)||Non Melting|
|Base oil||Blend of white oils|
|Solid lubricant||Direct food additives|
|Copper corrosion (IP112)||Pass|
|Water washout (ASTM D1264) @ 38 oC||t;2% max.|
|Dynamic corrosion resistance (EMCOR) (IP 220)||0:0|
|Shell Four Ball (IP239) Weld load||400kg|
|Scar Diameter @ 40kg 1 Hr||0.83mm|
|Operating temperature range||-30oC to +120oC|
All ingredients are FDA listed. STELLA 3H Grease is NSF 3H registered and meets the USDA 1998 H1 Guidelines.
This product does not contain genetically modified ingredients, nut oil or nut oil derivatives.